Product Description
| Product name |
Thickened fireproof stone spar plastic lock spc floor |
| Model number |
Yamazon-Y009 |
| Surface Technology |
embossed |
| product specification |
177.8*1219.2mm |
| Product substrate |
High-density environmental protection substrate |
| Installation technology |
u-shaped lock |
| Thickness |
4.0 (5.0/6.0mm can be customized) |
| Environmental protection level |
European environmental protection standard E class |
| Indoor/Outdoor Use |
Indoor |
| Apply to |
living room, dining room, shop, kitchen, hotel room, classroom, office, restroom, etc. |
| Brand |
Yamazonhome |
Product Description
The SPC floor is mainly composed of calcium powder and polyvinyl chloride stabilizer in a certain proportion to form a composite floor covering material. It is a new material for energy saving and emission reduction, hard SPC indoor flooring. The SPC floor uses calcium powder as the main raw material. After plasticizing and extruding the sheet, four-roll calendering heat-applied color film decorative layer and wear-resistant layer, it does not contain heavy metal formaldehyde and harmful substances. It is a 100% formaldehyde-free environmentally friendly floor.
The new stone-plastic floor technology overcomes the problems of seam separation, warping and drumming that occur when most floors are subjected to changes in external cold, heat, dryness and humidity.
The main structure is divided into UV reinforced coating, transparent wear-resistant layer, printed fabric layer, and base balance layer (lock splicing system).
UV strengthening coating: The floor treated with UV paint strengthening will effectively improve the performance of the floor such as wear resistance, high temperature resistance, and stain resistance.
Transparent wear-resistant layer: the core protective layer that directly affects the service life of the plastic floor. A high coefficient wear-resistant layer can increase the service life of the floor.
Printed fabric layer: Use high-definition digital imaging technology to scan the real wood texture at a macro distance, analyze the real wood texture, and present the wood grain image vision.
Basic level balance layer (lock splicing system): the balanced structure of the whole floor base layer of the journey, at the same time, it has flame retardant effect, and the fire protection level reaches B1 level.
SPC lock floor lock process
The locking technology is to connect the floor boards in a way of interlocking through the inverted tenons around the floor, so as to assemble the floor boards into an overall structural form. The locking technology realizes "self-connection" without any external accessories, which is a more advanced floor structure in the industry. Especially after the rise of geothermal, after repeated tests, the industry has gradually realized that the locking floor can be directly laid on the floor heating to ensure the heat conduction effect of the geothermal floor; at the same time, the locking can ensure the stability of the floor.
Advantages of SPC lock floor
(1) Ecological and environmental protection
(2) Fire prevention and fire prevention grade B1, second only to stone
(3) Various surface treatments (concave-convex pattern, hand-grip pattern, pair pattern, mirror pattern)
(4) Wear-resistant, wear-resistant grade T
(5) Moisture-proof, no deformation when exposed to water, can be used in kitchens, bathrooms, basements, etc.
(6) The colors are beautiful and diverse, the mosaic construction is seamlessly connected, and the installation is convenient and quick
(7) Non-slip, more astringent when exposed to water, not easy to fall
(8) Noise reduction, comfortable and elastic walking, less prone to injury when falling
(9) Daily maintenance does not require waxing treatment, it can be wiped with a towel or wet mop
Construction points before installation of SPC stone-plastic lock plate:
1. A 10mm expansion joint should be left in front of the wall, door frame and SPC. For rooms larger than 100 square meters (length and width more than 10 meters), there should be gaps for expansion. If the length of the corridor exceeds 15 meters, expansion joints should be set at about 10 meters. Keep a gap of not less than 13 mm between the door and the ground to ensure that the normal door switch will not be worn with the ground.
2. It can be used on the concrete floor and tile surface or the subfloor with moisture infiltration, but the next layer must have a moisture-proof pad.
3. After the product enters the installation site, it should be placed in a place with standard ventilation, backlight and no humidity. The product must be stored at room temperature for at least 48 hours without opening the package before installation.
4. Be sure to put heavy objects (such as a bundle of planks) on each new connection to make it stable.
5. Reserve a height: The customer should properly reserve the required height according to the contact height between the actual ground and the SPC stone-plastic lock floor, especially door pockets, corners, heating covers and other irregularities and details. Analytical processing.
Construction management process of SPC stone-plastic lock floor installation project:
Step 1: Clean the basic ground.
Make sure that there are not many sand particles on the ground, so as not to affect various minor problems in the later use of the floor.
Step 2: After the ground is cleaned, spread moisture-proof cotton.
The third step: choose the paving method:
1. 369 splicing method; 2. 4/5 staggered front paving; 3. I-shaped splicing; 4. DIY creative splicing;
Step 4: After choosing the paving method, start laying at a right angle wall. After aligning the buckles, if the buckles are embedded at a 45-degree angle, the floor laying does not require a wooden frame; it can be laid out directly in this way, leaving a gap of 10mm between the wall and the board.
Step 5: After the entire ground pavement is completed, enter the final process. If you need to install the base line after finishing the lock floor, install the base line directly. If the base line is not installed, just seal it with glass glue. (It is the wall, lock the gap between the floor and the wall, and use glass glue to store it, so it will look more beautiful.)
There are many colors to choose from, of course, you can also customize other colors according to your needs.
Renderings show
Company Profile
Shouguang Yamazon Home Materials Co., Ltd. was established in 2020, mainly engaged in the production and sales of wooden structure buildings and furniture. The company has 50 employees and 6 designers. It has rich experience in wood structure and furniture design, and can independently undertake the design of wooden house projects. It has complete automation equipment such as wood structure processing centers and furniture processing centers. At the same time, it is equipped with a plywood production line, which can fully meet the supporting requirements for the construction of wooden houses and subsequent furniture and interior decoration. We undertake the design of customized wooden structures, furniture and hotel projects, decoration supporting services, as well as production and processing services of wooden glued beams, plywood and furniture. You are welcome to call or email for consultation at any time.
1 Years Coverage
After-Sales Services&Money Back Guarantee
After u get our furniture if it is damaged we would refund the full money to your account provided or we would delivery the new furniture to u in one week.
Please note: the warranty does not cover deliberate physical damage, severe moisture, or intentional damage.
* In addition, we also guarantee all of our products to be working when you receive them unless otherwise stated. Your satisfaction is important to us, so if your product is DOA (Dead On Arrival), let us know, and return it to us within 30 days of the date of purchase. We will send a replacement to you as soon as we receive your returned item (Costs associated with returning the items are not refundable. We will pay costs incurred in sending the replacement).
* Warranty will be void if products are misused, mishandled, or modified in any way.
* Restocking fees may be incurred in cases of refunds due to change of mind. For International buyers only
* Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
* Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
* Processing and Handling charges on return items are the buyer's responsibility. A refund will be issued as soon as is reasonably practicable and the customer will be provided with an e-mail notification. Refund only applies to the cost of the item Disclaimer.
If you are pleased with your purchase, please share your experience with other buyers and leave us positive feedback. If you are dissatisfied with your purchase in any way, please talk to us first!
We are happy to help you solve any problem and if the situation calls for it, we will provide refunds or replacements.
We try to help our customers rectify any problem within reasonable limits.
Depending on the situation, we may still entertain warranty requests.
Audited Supplier 
){kind=link}