Creative Design House Courtyard Wood House-0189

• Customization: Available
• Warranty: One Year
• Material: Pine
• Model NO.: yamaj-0189
• Grain: Irregular Grain
• Bonding Strength: Ⅲ(Nc)
• Plywood Type: Veneer Boards
• Formaldehyde Emission Standards: E0
• Specifications: 1220*2440*15mm
• Place of Origins: Shandong Weifang
• Grade: Excellent Grade
• Usage: Outdoor
• Types: Mobile Housing
• Function: Heat Preservation, Windproof, Sunshade
• Structure: Lightweight Structure
• Applicable Occasions: Blockhouse,Wooden Plywood
• Style: Morden,Simple
• Transport Package: Standard Packaging
• Specification: customized
• Trademark: Yamazonhome
• Origin: Weifang, China
• HS Code: 4412499090
• Production Capacity: 50000pieces/Year
• Package Size: 2100.00cm * 2400.00cm * 16.00cm
• Package Gross Weight: 20.000kg

Product Description

 

Creative Design House Courtyard Wood House-0189

#Name	Creative Design House Courtyard Wood House-0189
#Brand	Yamazonhome
#Material	Pine, spruce, oak, birch, camphor, nanmu and antis
#Function	Heat preservation, windproof, sunshade
#Types	Mobile housing
#Structure	Lightweight structure
#Style	Morden,simple
#Technology	Carbonization, grinding, assembly, painting, carving

 

Product Description

1. The glulam structure is divided into two types: the plywood structure and the orthogonal glulam structure. Laminated glulam structures are mainly suitable for single- or multi-storey wooden structures with large spans and large spaces. Orthogonal glulam structures are mainly suitable for floor and roof structures, or single- or multi-layer box-type wood structure buildings composed of orthogonal glulam.
2. The fiber direction of each ply of the plywood component should be consistent with the length of the component. The number of laminate layers in the section of the laminated glulam component shall not be less than 4 layers.
3.  The directions of the fibers between the layers of the orthogonal glulam components should be stacked and orthogonal to each other. The number of layers of the cross-section should not be less than 3 layers, and it is not suitable for more than 9 layers, and the total thickness should not be greater than 500mm.
4. When designing the laminated glulam components and orthogonal glulam components, the requirements for structural glue should be indicated according to the use environment, and the component manufacturers should strictly follow the design requirements for production.
5. The design and construction requirements of the laminate-laminated timber structure should comply with the relevant requirements of the current national standard "Technical Specifications for Glued-Laminated Timber Structures" GB/T50708.
6. The production requirements of the laminated wood structure should comply with the relevant provisions of the current national standard "Technical Specification for Glued Wood Structure" GB/T50708 and "Glulam for Structural Use" GB/T26899.
7. The thickness t of the laminate is: 15mm≤t≤45mm; the size of the boards used for making cross-laminated wood should meet the following requirements: the width b of the laminate is: 80mm≤b≤250mm.
8. Orthogonal glulam should be composed of boards of the same length and thickness of the same layer. The board can be lengthened with finger joints, and the strength of the finger joints should meet one of the following requirements: f t,j,k≥5+f tk m,j,k≥8+ f tk where; f t,j,k --Standard value of tensile strength of finger joints (N/mm2); f m,j,k--standard value of flexural strength in width direction of finger joints (N/mm2); f tk--standard of tensile strength of template value (N/mm2).
9. Orthogonal glulam components can be used for floor panels, roof panels and wall panels, and the design of the components shall comply with the relevant provisions of Appendix G of this code.
10. The length direction of the outer layer of orthogonal glulam should be arranged along the grain, and two layers of wood can be arranged along the grain as the outer layer. When required by the design, the cross-grain laminate can also be used in a two-ply plank configuration.
11. Orthogonal glulam components can be connected by finger joints, and should meet the following requirements: when the components are finger-joined, the laminates of the cross-sections at both ends of the components at the finger joints should be arranged in the same way, and the grain direction of the components should be consistent accordingly; The finger joint length of the finger joint should not be less than 45mm.
12. When the cross-laminated wood components are connected by finger joints, the strength of the finger joint joints shall be determined according to the following regulations: when the strength verification experiment at the finger joint joints of the components is carried out according to the relevant national experimental standards, the strength of the joints shall be determined. The standard value of flexural strength shall not be lower than the standard value of flexural strength of finger-jointed members required by the design; when the strength verification experiment at the finger-jointed joints of the members is not carried out, the design values of the flexural strength and tensile strength of the finger-jointed joints of the members shall be It can be taken as 67% of the value of the fingerless member, and the design value of the compressive strength is the same as that of the fingerless member.
13. When the cross-laminated wood is glued, the surface of the board is smooth, free of dust, impurities, pollutants and other exuding substances that affect the bonding. After gluing, the laminate should be glued under pressure within the time specified by the adhesive used, and the glued surface should not be contaminated before gluing.
14. The splicing surface between the outer parallel grain boards of the same layer with orthogonal glue is suitable for gluing with adhesive. Splicing can be adopted for the splicing surface between the inner side grain wood board of the same layer and the horizontal grain wood board of the same layer. However, the splicing gap should not be greater than 6mm.
15. The adhesive used in cross-laminated wood should meet the requirements of strength and durability, and the type and performance requirements of the adhesive should comply with the relevant provisions of the current national standard "Technical Specifications for Glued Wood Structures" GB/T26899.

 

Glulam beam- glued laminated timber, it is made of s4s pine planks. By cold pressing and gluing to become the customized size beam. It's maximum length is 30m ,thickness and width is any what u want.AS/NZS4357     F17

 

LVL- laminated veneer lumber, it is made of pine veneer whose thickness below 3mm, width is 1270mm, length is 1270mm. By gluing and hot pressing to become customized thikness board then cut the board       to become planks with customized width. The maximum length would be 12m. The maximum thickness is 150mm. The maxminum width is 1220mm.AS/NZS4357     F17

 

The new low -carbon environmentally friendly wood structure of moisture, fire prevention, and durability research conclusions have changed everyone's prejudice to wood as architectural materials. The wooden structure is easy to transform and repair, and can be renewed and reused. The pure log exudes the aroma of natural logs, which is conducive to people's breathing and physical and mental health. Therefore, the superiority of glulam is incomparable, and its status in wood structure buildings is irreplaceable.

The size and shape of the glue wood are no longer limited by the natural characteristics of the trees, and it can be created according to the design needs of the design needs. Big span wood structure buildings and various creative modeling design are possible.

 

Glulam is a large -sized engineering wood formed by the drying of the kiln dry. Glulam not only maintains the traditional beauty and design intensity of the wood, but also has extraordinary refractory ability, insulation and dimensional stability. Due to the drying of the layer, the plate is dry and glued into a large -standard material, and the internal water content is uniform, which avoids problems such as dryness and cracking and warp.

 

You can use small specifications to make large -standard materials, which provides a way for the use of trail wood, plate skin, and short materials. The requirements for processing technology, processing equipment and quality management are also strict. The energy benefits of the building are determined by the preservation characteristics of the structural system and materials that constitute the building.